Ultimate Drawer System
Copyright Claim
Ultimate Drawer System
Boost
265
489
74
Print Profile(2)
Shelves - 0.28mm layer, 2 walls, 0% infill
Designer
35.3 h
8 plates
Drawers - 0.2mm layer, 2 walls, 15% infill
Designer
11.7 h
6 plates
Boost
265
489
74
12
744
748
Released
Description
🗃️🗄️📌🔩 Give a look to the entire Ultimate Drawer System collection to discover many drawer layouts and accessories!
Features :
- Shelves are made with grooves, avec drawers have a tongue, that let you to print a drawer of any height and place it anywhere into the shelf,
- Shelves are stackable horizontally and vertically for an easy scale up, you can attach them together with M4x8mm csk screws and M4 nuts, side to side or bottom to top
- Shelves are wall mountable, each one have 4x 5mm holes at the back
- Shelves are available from 2 to 15 drawers high
- Each drawers are available from 1U to 6U height. However, there is a limit in number of files per post, so you'll find 4U to 6U on this one
Comment & Rating (74)
All
Print Profile
Drawers - 0.2mm layer, 2 walls, 15% infill
Printing for my sons Lego collection. They are going well so far. Other then a filament tangle 🫣
The designer has replied
1
Reply
love the colours!
0
Reply
Boosted
Great storage system! I love how modular it is it can be set up however you want.
0
Reply
Print Profile
Shelves - 0.28mm layer, 2 walls, 0% infill
these are perfect. good clearance so slide well and find their home easily. lots of configurations. thanks.
0
Reply
Print Profile
Drawers - 0.2mm layer, 2 walls, 15% infill
all good to go
0
Reply
Boosted
非常喜欢这种模块化设计
0
Reply
Print Profile
Shelves - 0.28mm layer, 2 walls, 0% infill
in my opinion this is a great setup good use of the storage and it can be colorful I really like it
0
Reply
A HotEnd Drawer for the XL would be awesome . ;-)
Might be able to squeeze 5 Hotends in there.
(Edited)The designer has replied
0
Reply
Do you mean this drawer in a xl version ? https://makerworld.com/en/models/72507#profileId-76685
0
Reply
Replying to @MarcelBichon
Yes! I was going to enlarge 150 and 150 but then realized it would make the compartments to big for the Hotends. could probably get 6 Hotends in an XL
0
Reply
Replying to @Jmorgan
I'll give a try
0
Reply
Print Profile
Shelves - 0.28mm layer, 2 walls, 0% infill
0
Reply
Boosted
Where can the drawers without the dividers be found?
The designer has replied
0
Reply
@BootlegStudios Look for the Drawer_01_Comp_-_1U.stl file !
0
Reply
Boosted
Replying to @MarcelBichon
Thank you!
0
Reply
What's the rationale behind having no infill?
The designer has replied
0
Reply
Print speed
0
Reply
Boosted
Replying to @MarcelBichon
printing in britle cf material, seems I'd better infill >20%
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (11)
Click to see more
Related Models
© 2024 MakerWorld