Calendar and Pencil Holder
Boost
261
385
43
GIF
Print Profile(2)
My Choice
Designer
7.7 h
2 plates
![[A1 mini] 0.2mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/USb345b048231e0e/47988675/instance/2024-02-06_f8311b991c58b.png?image_process=resize,w_100/format,webp)
[A1 mini] 0.2mm layer, 2 walls, 10% infill
8.3 h
2 plates
Boost
261
385
43
9
345
212
Released
Description
- Print in place perpetual calendar, no assembly needed for the calendar mechanism.
The only assembly needed is to push PacMan ghost into the connector (which will be rotating into the calendar).
- easily attachable PacMan ghost pencil holder for pencils/brushes.
- There are 6 holes @ 9mm diameter and 2 holes @ 14mm diameter, for different “tools”. Or use it as a decor only.
- The ghost model can be used also standalone, without the calendar, or print it in more color combinations.
- PacMan ghost model has two sides, as in the animation.
- I've build tolerances for the connector between ghost and calendar, but it's falling off from ghost, please use a drop of glue between connector and ghost. ( Do Not glue the connector to Calendar, to allow rotation of PacMan ghost).
Comment & Rating (43)
All
Print Profile
[A1 mini] 0.2mm layer, 2 walls, 10% infill
The best Calendar, Thank you so much!
printed in a Bambu Mini
(Edited)
3
Reply
Looks super !!! Thank you very much for your review !!!
0
Reply
Print Profile
My Choice
kids like it.
The designer has replied
2
Reply
Thank you ! That's a better color choice than mine :)
0
Reply
Cute
The designer has replied
1
Reply
wow ... what filament is that "red" one ? looks fantastic!!!! Paint those eyes with black, should look better 😁
Thank you very much for your review !
0
Reply
Boosted
Print Profile
My Choice
this came out awesome!
The designer has replied
1
Reply
looks good !!! thank you for the review !
0
Reply
Print Profile
My Choice
I love this design! It's so well thought out. Perfect print in place. Thanks for creating it.
The designer has replied
1
Reply
so glad you like it! you used better colors than me !! looks great! thank youuu!
0
Reply
Print Profile
My Choice
😍
The designer has replied
1
Reply
thank you for your review!
0
Reply
Boosted
Print Profile
My Choice
love this so much! great desk print!
1
Reply
Print Profile
My Choice
1
Reply
So far I've just printed out the base but I can't get the months and the dates to turn independent of each other .
The designer has replied
0
Reply
hmmm that is not good, there is a gap of at least 0.3mm between parts. something is wrong or filament is not calibrated correctly. Did you used my printing profile ?
0
Reply
Replying to @FlorinV
Yes, I used your print profile. I used Sunlu filament and basic PLA settings
0
Reply
Replying to @rachele819
can you try a filament calibration ? If it's too complicated or not sure how to do it, maybe try to lower the filament flow ratio a bit and print a small test to see if it's ok: https://makerworld.com/en/models/136666#profileId-148687
You need to be able to move the 0.3mm lever.
For example, if you have flow ratio 0.98, You can try to lower it to 0.965.
0
Reply
Print Profile
My Choice
The result is really nice and cute, so it was worth it for me.
But if you don't normally print multicolor it will feel like hell of a filament waste (normal for multicolor print though) and don't make the mistake of printing with supports! Defaults will be better, trust me.
Note: if you want to use supports: The support breaks often when pulling it out (standard, not tree). If it does poke a screwdriver in and turn until it rips free.
(Edited)The designer has replied
0
Reply
First of all, thank you for your review!
My profile has no supports. This model works without any supports. Also, just checked the filament flush quantities in Bambu Studio: total on both plates: almost 40 grams. Total model weight is 240 grams. There is some waste, but I've tried to minimize it.
Please don't use supports, I don't see any need for this model.
PS: you can choose to print the calendar (base) in one color, delete the numbers from the print profile, less waste, but the numbers will just be cut out, not colored.
(Edited)0
Reply
Replying to @FlorinV
Yes sorry, realized that I structured my comment suboptimally. Have edited it to better reflect what I meant to say.
My main point is, that printing it with supports was my mistake and if someone makes it too I wanted to put my findings out into the world of how they can be removed.
(Edited)1
Reply
Replying to @Timoyoungster
thank you for clarifying this.. i got scared for a bit that somehow i messed up the profile. :)
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld