Voronoi deer ornament
Copyright Claim
Voronoi deer ornament
Boost
370
749
280
Print Profile(7)
![[All Printers] Just a Brim: 0.2mm layer, 2 walls, 12% infill](https://makerworld.bblmw.com/makerworld/model/USc4b771ff158ccb/design/2023-11-21_acc49ed409f6.jpg?image_process=resize,w_100/format,webp)
[All Printers] Just a Brim: 0.2mm layer, 2 walls, 12% infill
2.1 h
1 plate
25cm X1C PLA 0.2mm layer, 6 walls, 25% infill manual support
6.9 h
1 plate
![[100 Scale] A1 mini compatible](https://makerworld.bblmw.com/makerworld/model/USc4b771ff158ccb/design/2023-11-27_2d47d6a65067b.jpg?image_process=resize,w_100/format,webp)
[100 Scale] A1 mini compatible
2.1 h
1 plate
18CM .2mm layer, 6 walls, 25% infill,Support
4 h
1 plate
Click to see more
Boost
370
749
280
5
1.8 k
1.7 k
Released
Description
Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself.
Should be fine without supports and add a brim to ensure correct first layer.
You might want to check the flat deer also ;)
Comment & Rating (280)
All
Boosted
Print Profile
[All Printers] Just a Brim: 0.2mm layer, 2 walls, 12% infill
Colored the antlers. Came out perfect! :) Thx!!
(Edited)
The designer has replied
2
Reply
You gotta show us!
(Edited)1
Reply
oh wow that's gorgeous. I will need to do the same with some bambu brown I just got in.
0
Reply
Boosted
Any chance you will be adding a fawn with baby antlers to accomplice it? 🤞
(Edited)1
Reply
Beautiful! Printed with little effort, and just needed 5 seconds of heat gun treatment to clean up the strings. Awesome model thanks for sharing/remixing.
Made Profile A1 compatible - sorry for leaving y'all out. I join ya soon enough once UPS arrives :)
(Edited)
3
Reply
Print Profile
12cm high, 0.16mm layer, 2 walls, 100% infill
amazing
The designer has replied
1
Reply
😍😍
0
Reply
Print Profile
[All Printers] Just a Brim: 0.2mm layer, 2 walls, 12% infill
0.2mm, 30mms
0
Reply
What colour is that please.?
0
Reply
Bambu PLA Silk Copper
0
Reply
Print Profile
[All Printers] Just a Brim: 0.2mm layer, 2 walls, 12% infill
Nice one. Looks incredible with Copper Silk PLA
The designer has replied
0
Reply
A quick lick with a lighter or a heatgun will clean the antlers up.
Great color.
0
Reply
Now cleaned. Thank you
0
Reply
Print Profile
[All Printers] Just a Brim: 0.2mm layer, 2 walls, 12% infill
Dekorative model. Nice design
2
Reply
Print Profile
[All Printers] Just a Brim: 0.2mm layer, 2 walls, 12% infill
beautiful model, thank you :)
2
Reply
Print Profile
25cm X1C PLA 0.2mm layer, 6 walls, 25% infill manual support
leg
The designer has replied
0
Reply
penso che il problema sia nel filamento… ne ho stampate più di 10 ma non ho mai fallato una stampa… 🍻
0
Reply
Print Profile
18CM .2mm layer, 6 walls, 25% infill,Support
I attempted 5 times cuz my prints all failed until i used a tree support. it came out pretty good. thanks for sharing!
The designer has replied
0
Reply
I also failed several times and finally found the reason. I’m glad you like it. It looks beautiful .
(Edited)1
Reply
Print Profile
[All Printers] Just a Brim: 0.2mm layer, 2 walls, 12% infill
More light, more fun!!!
1
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
Related Models
© 2024 MakerWorld