Holder for USB microscope.
Features:
Made several mounting options:
1) For screwing to the base (printed or wooden) - Bottom.stl
2) On the magnetic holder:
2.1) Rectangular magnets 20x10x5 ( https://aliexpress.com/item/1005001832581739.html ) - Bottom-magnet (20x10x5).stl
2.2) Round magnets 20x5 ( https://aliexpress.com/item/1005001832538773.html ) - Bottom-magnet (20x5).stl
Additional accessories:
1) Shaft diameter 8mm, length 200-250mm - 2 pcs.
2) Stud screw M8, length 10mm less than the length of the shafts.
3) Nut М8 - 2 pcs.
4) Bearings 688zz - 2 pcs.
5) Screw M3x10 - 12 pcs.
6) Screw M3x20 - 2 pcs.
7) Nut M3 - 14 pcs.
8) Screw M4x20 - 1 pc.
9) Nut M4 - 1 pc.
10) Sleeve 8x11x30 ( https://aliexpress.com/item/32476367665.html ) - 2 pc.
Source: https://www.tinkercad.com/things/dqGJjhK0FIS
Soft = Microspin2 MP Digital Microscope Capture Software(44114) - https://www.celestron.com/pages/drivers-and-software
USB Microscope = https://www.aliexpress.com/item/1005004412410690.html
============================================
Держатель для USB микроскопа.
Особенности:
Сделал несколько вариантов крепления:
1) Для прикручивания к основанию(напечатанному или деревянному) - Bottom.stl
2) На магнитном держателе:
2.1) Прямоугольные магниты 20х10х5 ( https://aliexpress.com/item/1005001832581739.html )- Bottom-magnet(20x10x5).stl
2.2) Круглые магниты 20х5 ( https://aliexpress.com/item/1005001832538773.html ) - Bottom-magnet(20x5).stl
Дополнительные комплектующие:
1) Вал диаметр 8мм, длина 200-250мм - 2 шт.
2) Шпилька винт М8, длина на 10мм меньше чем длина валов.
3) Гайка М8 - 2 шт.
4) Подшипники 688zz - 2 шт.
5) Винт M3x10 - 12 шт.
6) Винт M3x20 - 2 шт.
7) Гайка M3 - 14 шт.
8) Винт M4x20 - 1 шт.
9) Гайка M4 - 1 шт.
10) Втулки 8x11x30 ( https://aliexpress.com/item/32476367665.html ) - 2 шт.
Исходники: https://www.tinkercad.com/things/dqGJjhK0FIS
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20-50