Bambu Lab P1P Screen Faceplate Frame by morikostyles

morikostyles

3D Printer>3D Printer Parts

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

Regular, snap fit, 0.2mm layer, 2 walls, 15% infill

48 min

1 plate

4.6(32)

0.2mm layer, 2 walls, 15% infill

38 min

1 plate

5.0(1)

Boost

205

154

Released

Description

Minimalist screen frame/faceplate/protector for the Bambu Lab P1P.
Remixed from the BU Faceplate by 3D Sourcerer

Jan 31, 2023 Update:

Added a second version that is compatible with the ARC enclosure. The original version, at least in my experience, was slightly interfering with the ARC enclosure's front door, so the second version resolves this issue.

p1p

printer

faceplate

Comment & Rating (38)

@jtkasprick

Print Profile

0.2mm layer, 2 walls, 15% infill

fit well looks good. no issues with print

@iiMT

Print Profile

Regular, snap fit, 0.2mm layer, 2 walls, 15% infill

only issue is I had to put a piece of filament poop in between the cover and the screen so that the screen can be removed after installing it. without that I don't know how you would trigger the push lock. I would recommend adding a bracer into the design but this solution has worked fine for me to remove the LCD multiple times in testing.

(Edited)

@user_3788572154

完美安装，就是稍微有点紧，安装的时候需要用点力气

@jtkasprick

Print Profile

Regular, snap fit, 0.2mm layer, 2 walls, 15% infill

@K0davis

Print Profile

Regular, snap fit, 0.2mm layer, 2 walls, 15% infill

Printed great and fast

@impressme

Print Profile

Regular, snap fit, 0.2mm layer, 2 walls, 15% infill

It did not fit well. And hard to remove. I ended up printing another model.

The designer has replied

@Tridense

Ok, please tell me how to improve the print profile which you have rated.

@alessandro0811

Boosted

great

@user_3980593544

Print Profile

Regular, snap fit, 0.2mm layer, 2 walls, 15% infill

printed well thanks

@ThatGuyPrints

Print Profile

Regular, snap fit, 0.2mm layer, 2 walls, 15% infill

i couldnt slide the screen into place

@13thetigger13

I can't even get it on. it fits in there if I try it the other way that it doesn't go, but the back part catches on the print and I can't get it on. what a waste.