xTouch Case for P1P/P1S by DJ DooM

DJ DooM

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.9 h

1 plate

5.0(1)

0.2mm layer, 2 walls, 20% infill

2.3 h

1 plate

3.0(1)

Boost

Released

Description

Easy to print case for the xTouch Display for bambulab P1P/P1S

Print with Tree-support as shown in the sliced picture.

Display can be mounted with screws in the inner case, but they are not needed.
Just slide the display inside the housing and attach a micro USB cable to it, for power.

If you want to you can also use the inner USB port to power the display. Therefor i made a slit in the case mount, where you can put your cable through.

Manual for xTouch installation available here: https://github.com/xperiments-in/xtouch

Comment & Rating (5)

@elmedritsche

Print Profile

0.2mm layer, 2 walls, 20% infill

print and design is nice but unfortunatelly the micro usb port is not properly alligned! see picture!

@dj_doom

I will have a look on that.

@dj_doom

So i just rechecked my model and my screen. It fits perfectly. I just reuploaded the .3mf, feel free to print the outer case again. Don't know if there are different revisions of the touchscreen module, perhaps there is the issue.