Bambu Lab Filament Clip - TPU 95A
Copyright Claim
Bambu Lab Filament Clip - TPU 95A
Boost
42
85
24
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
15 min
1 plate
Boost
42
85
24
2
162
179
Released
Description
Print from TPU-95A. Layer .12mm and pretty slow to better print quality
Comment & Rating (24)
All
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Really like these over the more rigid ones I've done in the past. Printed 2 to see how they went but am now printing the first batch of 40 to do all my Bambu spools. Thanks for the model!
1
Reply
The pleasure is all mine. 😀
0
Reply
Boosted
I ended up having to take some of these off one side of the spool, I had all 4 on each spool but noticed that when in the AMS, if you have these on the left hand side when looking at the spool in the AMS, it would get stuck on a roller. Removing them and only having them on the right hand side is all good though.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
A note for makers, fits only Bambu spools.
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
- As simple as it is useful, great in TPU but printable in any material.
- Tan simple como útil, excelente en TPU pero imprimible en cualquier material.
- Aussi simple qu'utile, excellent en TPU mais imprimable dans n'importe quel matériau.
- Semplice quanto utile, ottimo in TPU ma stampabile in qualsiasi materiale.
1
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
By far the best filament clip that I’ve used, even if it just works for Bambu spools
2
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
awesome file. works amazingly.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great print and works amazingly in the ams have printed 40 or so with no issues
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
this worked really well!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
perfect thank you
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
très bien ,impeccable
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
some minor stringing, but with tpu that is a given. The brim did a great job holding the print to the bed, almost too good.
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld