So after printing Sven's Omniwrench I had to design some of the collectibles in the games to add to the Omniwrench. I'm in the process of making a stand for the Omniwrench too and will upload when its ready.

I have provided the bolts in two pieces and as one piece. Supports are needed unless you print them upside down. I only have the textured PEI plate at the minute so I had to improvise to lessen the textured look and post processing before painting. They aren't a friction fit so will need a little dab of CA glue to join the pieces. This also helps with painting too as I drilled a hole in each piece and used a BBQ skewer to hold the parts of the bolts.

I have painted these up by airbrushing with Mr Surfacer 1500 first, then a few coats of Tamiya LP-20 Light Gunmetal and the Golden Bolt was painted with Tamiya TS-21 Gold.

I couldn't quite get a spring design I was happy with (Still early days with Blender!) so if anyone wants to do a remix then that would be awesome!