Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Black Transmission Distance: 0.6

Swap Instructions:
Start with Black
At layer #12 (1.12mm) swap to Orange
At layer #15 (1.36mm) swap to Gray
At layer #18 (1.6mm) swap to Jade White
At layer #26 (2.24mm) swap to Black for the rest.