AMS closure Claps with logo by Tom3D

Tom3D

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

39 min

1 plate

5.0(11)

Boost

Released

Description

I made AMS Closure Claps for easy close and open, so you can not forget to open or close the lid.

I hope you enjoy it.

Please give me a feedback, and thank you for a rating.

Comment & Rating (19)

@Bushay

Print Profile

0.2mm layer, 2 walls, 15% infill

fits perfectly

(Edited)

The designer has replied

@Tom3D

THX

@Creative_3D

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed perfectly, Nice Snug fit that wont come loose while operating.

The designer has replied

@Tom3D

THX

@Marcus_S

I printed them upside down (as it was 5 min faster and less filament changes :-) ) and further I added some green color to indicate that the lock is open

(Edited)

The designer has replied

@Tom3D

Thanks for your feedback, nice photo. The green color indicator is a good idea

@MiniBlaze

Print Profile

0.2mm layer, 2 walls, 15% infill

I really love these buttons. It makes it easier to turn the ones on the AMS to have them. I did have to apply a bit of hit to clean the inside top. Wasn't hard to do. I printed w/o support. Since I'm doing a 2nd set for my other AMS, I'll try the supports that was the original default. I'll see what happens. Either way it is still a nice print. I like it a lot and once I got the inside top smoothed a bit, it fit perfect.

The designer has replied

@Tom3D

THX for your feedback

@Marcus_S

Print Profile

0.2mm layer, 2 walls, 15% infill

in my previous comment I wasn’t able to rate it…

@Magistus

Print Profile

0.2mm layer, 2 walls, 15% infill

The designer has replied

@Tom3D

THX

@HardStryker

Print Profile

0.2mm layer, 2 walls, 15% infill

Great idea. The xy distance from the support to the model could be a little larger so that you don't need a sharp knife to get it out , but great otherwise.