Gothic Expansion Pack: Bridges and Pavilions

Here is the first Expansion Pack for the Gothic Blox!

Bridges and Pavilions!

In this pack you get some brand new type of Blox, "Cut" Blox and "Pavilions".

Cut Blox are Blox cut in half, and then go together with Cy-Tiles own connections, designed to work well for both resin and FDM.
The point of this is that some of the Bridges as well as the ramps uses these connections in order be strung together to make as long bridges or Arches as your wargaming heart desires.

Also new are Pavilions, these are very light weight roof tiles, that makes it possible to dish out flat roofs on top any build, wrapping around structures and filling out corners.
Pavilions are also a new Hight within the system.
There are :
High Blox (two Blox high)
Blox (standard height)
Plinth (Half a Blox]
and now
Pavilion (a third of a Plinth)

In the set are also Blox called Pavilion Blox
The name is a little bit deceiving in that these are your standard Blox height, but the Doors , are slightly elevated, so that when surrounded by pavilions , the entrance will be perfectly level.

ALSO in this pack are the Mods made by Greywolf_99 who inspired
a lot of the content of this expansion.

you can also download some of these free from his page:

https://cults3d.com/en/users/Greywolf_99/3d-models

To fully enjoy the Blox system, you will need one of the Core packs.

These modles are suited for 6-8mm gaming .