Cigarette Dispenser
Remixed by
Copyright Claim
Cigarette Dispenser
Remixed by
Boost
16
44
11
Print Profile(1)
0.28mm layer, 2 walls, 10% infill
Designer
2.3 h
1 plate
Boost
16
44
11
0
124
121
Released
Description
This is a remix of a cigarette dispenser from Botcan3d. I tightened up the tolerances to make it smoother and also removed the knob and redid the cigarette label. If you use the 3mf you will need to color the cigarette plaque yourself.
This dispenser holds regular sized cigarettes. I also have a dispenser for 100s on here if you use those.
Printed at a 0.28 layer height with 10%infill. Ive printed both PLA and PETG
Comment & Rating (11)
All
Print Profile
0.28mm layer, 2 walls, 10% infill
Tolle Arbeit. Funktioniert einwandfrei und ist definitiv ein Hingucker was nicht jeder hat. Etwas größer könnte es meiner Meinung nach sein. Das Fach fasst im Moment ca. 15-20 Zigaretten. 40-50 wären auch gut.
1
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Perfect. Works like a charm!
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Other Issues
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Other Issues:Cigarettes sometimes tries to flow double Into the chamber. I made the spise holding them back a little taller to stop it
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld