Print profile is made for AMS, if you want to do it manually please follow the following :
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Lava Red
At layer #11 (0.96mm) swap to Sunrise Orange
At layer #16 (1.36mm) swap to Ivory White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.