A cutout of Peppermint Patty from Charlie Brown. She is 450mm tall (~18") and has a stand to hold her upright. She prints in different parts so that she can fit on a 250x250 build plate and is held together using pegs that are also printed. Peppermint patty is part of a Charlie Brown Christmas set that my family created for the Christmas season.

The idea for this cut out was to have Marcie tangled in the lights and Peppermint patty yelling at her. The Marcie cutout can also be found on my profile.

• Requires a 2 AMS system at minimum to print in full color.
• The base color is black and colored sections are printed on top of the black base.
• The skin color is from Sunlu along with the black, yellow, orange, gray and blue.
• Red is from MatterHackers
• Green is from Bambu.
• Brown is from polymaker.

Each color is a different STL file incase you wanted to print them separate and glue them on. Also the bambu slicer like to choose other color for the top infill the shine through the top color. The only way I found to fix this is the have each color its own STL file.

Sometimes I found that to get the parts a closer fit I ended up super gluing the two parts together but leaving the head detachable for easy storage.

If you are customizing the print make sure you have at least 6 solid layers for the surface so the the infill pattern does not show through.