Clemson Tigers Lightbox by Geek3Designs

Geek3Designs

Household>Decor

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

8.4 h

3 plates

4.8(6)

Boost

Released

Description

This is a Clemson Tigers lightbox that was requested via my request form. I enjoy making these so I try to get to as many requests as possible. I do them in my free time and post the majority of them here for free. As with most of my lightboxes, the rear cover has a cutout for wiring lights as well as a sawtooth style hanger in the event you wish to hang it on the wall. This model also includes a stand for displaying on a table

If you enjoy my work and would like to support my efforts, please consider buying me a coffee and following me so you don't miss my upcoming models as I release new ones often.

Comment & Rating (18)

@DirtyT

Print Profile

0.2mm layer, 2 walls, 15% infill

Great!

@ME3D

Print Profile

0.2mm layer, 2 walls, 15% infill

front separated easily from side, may be user error tho, overall good print

The designer has replied

@Geek3Designs

You may need to adjust your flow rate or your wall overlap settings

@ME3D

Replying to @Geek3Designs :

I have to remake it again, I will try the wall overlap settings and increase it slightly, thanks!

@Geek3Designs

Replying to @ME3D :

Flow rate is usually increased from .98 to between 1 and 1.05. I usually use the highest. Wall overlap should be set to between 25% and 50%. Again I tend to use the higher setting

@user_4161259174

can someone post a link to the light they used? i about started a fire with the one I found

The designer has replied

@Geek3Designs

I just buy the cheap sets from walmart. They are great value brand rgbw lights with a 6ft usb cord. They are weatherproof so I just strip the silicone coating off of them to be more pliable. I then use hot glue at every cut point to ensure they stay in place as the adhesive is not always the greatest. I then cut then to length and use the left overs with usb pigtails wired to only activate the white leds. I use rgbw lights in kid lamps and white leds for my others

@user_4161259174

Replying to @Geek3Designs :

thank you!

@Segarsmark

How does the orange, purple and white sections stay in the outer ring?

The designer has replied

@Geek3Designs

Im not exactly sure what you are asking. Each colored section gets loaded into the slicer at the same time. Bambu studio will then ask if you want to treat all the files as a single object. Choose yes and then set each part to the proper color in your AMS. This aligns all the parts properly and all parts print together and stick to each other. I can uploade a print profile to help

@Segarsmark

Replying to @Geek3Designs :

I was printing them separately lol. I figured it out once i posted this. Thanks for the reply!

@tlkdds71

Can you make the back panels without the cutouts? Thanks

The designer has replied

@Geek3Designs

I had added a solid version of the cover to the raw files

@chayner674

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice file, easy print!

@ME3D

I’m going to design one with just the tiger paw on my next few days off, but if you’re faster at making them than me, I wouldn’t mind if you saved me 4 hours lol

(Edited)

@user_4161259174

Print Profile

0.2mm layer, 2 walls, 15% infill

@AG1990

Print Profile

0.2mm layer, 2 walls, 15% infill

@Bystronicman08

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (18)

License

Related Models

Tiger Cub Tony

Tiger Coloured Hueforge

Tiger II Turret Mouse虎王炮塔鼠标1:35 Scale

Tiger Portrait