After uploading my last profile of Bambu Spool filament Clip - Side Mount, I created a curved version of this filament clip, named Red Lips, specific for Bambu Lab Spools, to be snapped on the internal side of the Spool. Pins and filament slot “snapping” capabilities are also been improved.

The main advantage of this clip is that you don't need to remove it before using the spool in the AMS because it does not interfere with rotation. Furthermore, thanks to the rounded shape, this clip does not block the filament during unwinding.

The only drawback is that on full spools you won't find room to snap this clip until you've used up enough: in this case you can print one of the two clips that I designed specifically and which you can find at this link: https://makerworld.com/it/models/59601

Warning: before before downloading and printing SPAM profiles, please check that when ★ 𝐅𝐚𝐬𝐭 is written it is really faster and not 30% slower at printing. Also make sure it was actually printed by author and that the photo used is not only a copy of the print from the original profile!