Cable label zip-ties
Copyright Claim
Cable label zip-ties
Boost
307
580
44
Print Profile(3)
No supports, 0.08mm layer, 2 walls, 15% infill
Designer
5.2 h
3 plates
5 pieces, 0.08mm layer, 2 walls, 15% infill
35 min
1 plate
A1 Mini version, use Bambu Handy for # of copies.
1.2 h
2 plates
Boost
307
580
44
0
429
292
Released
Description
The Cable Label
A simple zip tie with space to write and label your cables. When you're trying to locate a cable behind a TV or under a desk it can be difficult to tell which cable leads where. These labels are a simple and effective way of labelling all of your cables so they can be easily identified.
- Use different colours for different cables
- Quick and easy print
- No supports required
- Minimal filament used
Comment & Rating (44)
All
Print Profile
No supports, 0.08mm layer, 2 walls, 15% infill
printed very cleanly! my filament is too inflexible for these unfortunately (only have PLA) but I’ll definitely print more when I get more appropriate filament!
The designer has replied
1
Reply
Thanks for sharing the pic 👍🏼
(Edited)1
Reply
Print Profile
5 pieces, 0.08mm layer, 2 walls, 15% infill
a little stiff when inserting in the tab
0
Reply
Print Profile
A1 Mini version, use Bambu Handy for # of copies.
the quality is not that good and it could be longer
0
Reply
Print Profile
No supports, 0.08mm layer, 2 walls, 15% infill
1
Reply
Print Profile
No supports, 0.08mm layer, 2 walls, 15% infill
Printed a lot of them, thanks!
The designer has replied
1
Reply
you’re welcome, glad they’re coming in useful!
0
Reply
What materal works well if PLA isn't a good choice?
The designer has replied
0
Reply
PETG would be a better choice for more flex in the material.
0
Reply
Print Profile
No supports, 0.08mm layer, 2 walls, 15% infill
Printed in great detail and functions perfectly!
1
Reply
Print Profile
No supports, 0.08mm layer, 2 walls, 15% infill
easy cheap prints
i love stuff like this
1
Reply
Print Profile
No supports, 0.08mm layer, 2 walls, 15% infill
doesn't lock like it should. it just slips through
The designer has replied
0
Reply
sorry to hear that. I’d recommend cleaning your build plate, apply print glue and perhaps try a different filament to rule out moisture retention.
0
Reply
Hello, I like the labels you offer, it's just a pity that there are no suitable ones for my plants that have roughly the same design. At least so that I can attach them to my larger ones. So far I haven't found any, so I wanted to try to use them in a larger scale.
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld