Mouse Jiggler Engine Model 005 kit by J3D123

J3D123

Hobby & DIY>Electronics

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.20mm layer, 2 walls, 15% infill

Designer

1.7 h

1 plate

5.0(1)

Boost

Released

Description

I decided to use the Engine Model 005 kit I got with my A1 mini to make a mouse Jiggler as a simple DIY. I simply glued a little "TV static” print to the rotating piece and it's working great. I had to use the hardware that came with the Engine Model 005 kit to mount the mechanism to the bottom of the enclosure. One note is the mechanism that comes with the KIT is a bit loud while it's running but I hope someone will still get some use out of this. Don't forget to enable supports for the main enclosure piece.

Comment & Rating (7)

@KingOfCanaduh

Your profile prints too small. Couldn't fit the usb cable through the hole or the circle that goes on the engine piece.

The designer has replied

@KingOfCanaduh

I scaled everything up by 5% and now it works :)

@J3D123

it was a bit of a tough squeeze but I did get the usb port through the hole. I can work on making that hole a bit bigger if you found a lot of issues with the current design.

(Edited)

@KingOfCanaduh

Replying to @J3D123 :

If it's not too much trouble, that would be awesome (that way everything will still line up correctly)! I love the concept of this, otherwise. It works super well! :)

(Edited)