Hello, this is a special Drum used in Argentina for the Murga, it sounds for real!

you can customize the logo, (i put a default murga logo) and you can also customize colors by choose yours

Mounting Istructions

print the plate 1 (x2)

print plate 2 (x1)

print plate 3 (x1)

you also need

6x M5x133mm bolts with round head (or you can cut yourself a 5mm threaded rod at 13cm

6x self locking nuts (12x if you cut the rod)

12x washers inner 5,4mm out 15mm

1x couple of platillos

1 push spring

you also need a m5 or m6 bolt with nuts and washers for mounting the plate on top, but measures depends on what spring and plate (platillo)

you use