This modular LED lighting kit is designed to be able to use an LED strip inserted in a circular profile so that it looks very elegant floating in space. Inserting the LED strip on both sides expands the amount of light and effects.
Each size kit includes wall brackets, joining rings and end plugs. You can print everything you need. The included tubes are assembled together solidly, but due to the small contact surface it is not advisable to leave the joint without any protection on the outside. For this, supports and rings can be used.
The length of the tube sections included is:
Tolerances are perfectly adjusted in both the profiles and the end caps. In the case of the wall supports, they are designed to be used covering the assembly between profile and profile. If you need to add more wall supports, you will need to compensate so it doesn't wobble.
I use eSUN's normal white PLA+ and translucent PETG and TPU, which allows very good transparency for this type of diffusers.
Believe me: I have seen LED strips that reach 60 degrees in temperature and with 2 LED strips inserted in PLA and at maximum performance it is very likely that this will end very badly.