Included are 2 styles of build plate stops.
One, keys into the CR-10 Smart Pro plate, aligning in X and Y. The other, flat design, can use any 310x315 plate and aligns only in Y.

Also included, another design that sits lower that requires trimming the magnet.

Print the Plate_Stopper_310x315B first and use as a template for trimming the magnet then use the Plate_Stopper_310x315B_magnet_trimmed as final install.

If you want to support the designer and a small company, please consider purchasing textured (or smooth PEI) sheets from the Tiny Machines 3D webstore

Plates for sale, shipping from Houston, TX
Textured TM Flex

Smooth PEI TM Flex (etched "CR-10 Smart Pro)

Print Settings
ABS or higher temperature material!
Strong Settings (similar to Voron standard with 5 top / bottom layers, 4 walls and 40% gyroid infill)

Print orientation

Installation
Before installation, print your desired stop blocks

1. Lower bed to allow topside clearance to remove OEM locator screws
   Remove the M3x6 SHCS and save.
   
2. Raise bed to allow underside clearance to install brackets (wider side facing out)
   and install M3x6 SHCS.