修正了大支臂以及底座部分倒角过多导致打印丢失线条的问题 更改挂钩与挂放耳机部件样式更好的形成效果以及打印质量 修改底部连接件 以及添加网格LOGO 装饰垫片等~

黑色部分，建议使用低收缩丝进行打印。如PETG CF

需M3X10沉头自攻螺丝3颗 M3X14-16沉头自攻螺丝16颗

*Side_V2_XL-TKRemixes
Improve some chamfers to prevent the problem of losing fine lines on the side close to the heating bed.

*Base-TKRemixes
Improve some chamfers to prevent the problem of losing fine lines on the side close to the heating bed. Now you can print face down to get a flat surface

*Feet-TKRemixes -Add TPU assembly.

*Headpone_post_-_mount
Improves appearance and enables side-on printing for a smoother surface (but it is recommended to use low shrinkage materials such as PETG-CF and add skirts)

*Additional bottom grid decorative parts and countersunk head screw decorative spacers are added

M3X10 countersunk head self-tapping screws *3
M3X14or16 countersunk head self-tapping screws*16