💠 PRODUCT DETAILS 💠

Introducing our Bearing Fidget Spinner, a perfect fidget accessory for yourself or for gifting to a friend or loved one.

💠 CONSTRUCTION 💠

Product Dimension

🔹Length: 38mm
🔹Width: 38mm
🔹Thickness: 12mm

Additional Components

🔹Steel Balls: 4.5mm (20)
🔹Screw + Nut: M3 X 6mm Pan Head (2)
🔹Glue: Super Glue

💠 ASSEMBLY 💠

I find it best to start with the top part and place that face down first. I would then take the ring and place that over the top part. Now insert the 20 steel balls they should fall into the gap around the edge. Take the bottom part and place on top this will sandwich everything together. Insert your two nuts into the holes on the part. You can now slide the whole assembly off the table using your thumb and finger to apply pressure to both sides. Carefully flip and insert one screw at a time. You can now go ahead and glue the top and bottom cover plates to hide the screws.

Refer to the breakdown image for assembly diagram.