eSUN paper spool solution for Bambu Lab AMS Shared by ShortyTHEone

Shared by

3D Printer>3D Printer Accessories

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 10% infill

34 min

1 plate

4.5(64)

0.2mm layer, 4 walls, adaptive infill etc.

23 min

1 plate

4.4(18)

0.25mm layer, 1 walls, 0% infill

17 min

1 plate

4.0(2)

PLA 0.20mm

33 min

1 plate

5.0(1)

Click to see more

Boost

119

132

570

922

Released

Description

i'm using eSun's PLA+ since i bought my X1C with AMS, sadly the new Spools come on cardboard and i dont trust it fully and dont want my AMS full of cardboard dust. eSun is offering a solution for this, so i thought i gonna share it.

Its two Rims that attach to the Sides of the Spool, each Rim weighs around 15g and the holes for the Filament are still free to use.

//EDIT 10/26/2023: Several people reported that the spolls wont fit their AMS after installing the Ring on the spool. it seems that Bambu has changed some Specs on newer AMS units. if you run into the problem that your Spools wont fit your AMS unit and the lid cant be closed DesignCraft hast uploaded a Lid Riser, so you can fit every Spool and still close your Lid

Comment & Rating (132)

@tomtom5893

Print Profile

⭐𝐅𝐚𝐬𝐭 ▪️ [PLA] 0.25mm

I can't test yet how well they fit, but at least they're great visually and functionally

(Edited)

The designer has replied

@AneoPsy

Thanks for reviewing, I appreciate the feedback. What was wrong with your print?

@tomtom5893

Replying to @AneoPsy :

Nothing is wrong, I just couldn't test it yet, because i didn't have an open cardboard spool. :)

@pieropenguin

Print Profile

0.2mm layer, 2 walls, 10% infill

Printed 2 sets in blue eSun PLA+. Fits perfectly over the cardboard spools and works great, although I had to print the AMS adapter/spacer since it was rubbing against the lid.

The designer has replied

@ShortyTHEone

thanks for your review and your feedback, good to hear that it works with the lid.

@jerry320320

Print Profile

⭐𝐅𝐚𝐬𝐭 ▪️ [PLA] 0.25mm

接下來就是測試安裝了

(Edited)

The designer has replied

@AneoPsy

Thanks for reviewing, I appreciate the feedback.

(Edited)

@BossTechPrintIn

Print Profile

0.2mm layer, 4 walls, adaptive infill etc.

printed great, I like using these for my ESun cardboard spools

(Edited)

@BossTechPrintIn

Print Profile

0.2mm layer, 2 walls, 10% infill

looks good snug easy fit printed with PLA +

(Edited)

@gizmo.3d

Print Profile

0.2mm layer, 2 walls, 10% infill

Passt gut auf die Rollen 😍

@Matt.evill1888

Print Profile

0.2mm layer, 2 walls, 10% infill

the print itself is great but it for me doesn't serve its function properly for the reason that the tiny extra bit of diameter given the the esun spools make them not fit in the ams

The designer has replied

@ShortyTHEone

Hey Matt, are you sure you fit them properly on the spool? printed them myself and don’t have any problems with the AMS. I can close the lid and it spins without any problems for me 🤔

(Edited)

@Matt.evill1888

Replying to @ShortyTHEone :

unfortunately I am quite sure yeah. fitted multiple times on 2 different reels. I was thinking of printing another set to see if for some reason they were better

(Edited)

@ShortyTHEone

Replying to @Matt.evill1888 :

tell me if it changes anything. I can measure my set if you like, but doubt that will change anything. strangely it was designed by eSun themself to fit the ams, don’t know why it doesn’t fit yours. doubt bambu changed anything about the and itself 🤔

@noriwl

Print Profile

⭐𝐅𝐚𝐬𝐭 ▪️ [PLA] 0.25mm

Very helpfull and good model. recomend for everyone using esun pla+

@Noerakh

Print Profile

0.2mm layer, 4 walls, adaptive infill etc.

it printed great. I had to open my AMS for it to work though, because of the size of the roll. it kept getting stuck trying to retract the color. After figuring that out, it has not had a problem. I plan to print one of the spacers for the AMS lid, soon.