Peppermint Minnie Mouse Earrings

Jump Ring Installation:

4mm OD Jump rings are required as well as hooks like these : https://a.co/d/bx5rNqj Larger jump rings will not work.

The jump rings will be very difficult to install (sorry), have patience. Using a small jewelers needle nose pliers or strong tweezers will be very helpful. I tried to add some space for the tools, best of luck! If enough people have issues I can add a ring that I can add onto the model to be printed.

Alternate Jump Ring Installation:

I have not tried this but if you want to try to add the jump ring in the middle of the print process then can pause the print at layer 11 then put the jump ring and hook into the print then resume printing, but I would warn you that you really have to make sure the ring or hook doesnt move during printing… this is risky but I'd be curious to see if anyone is successful.

The red sparkle translucent filament looks amazing, this is the one I used: https://esun3dstore.com/collections/black-friday/products/esun-etwinkling-pla-1-75mm-3d-filament-1kg but it is very brittle.

I included 3 print profiles:

• AMS (preferred)
• Non AMS with manual layer swapping, print pauses at layers 16 and 18.
• AMS with only 2 color switches for faster print (this is the same as a manual color swap without the pauses in printing, the colors only switch at layers 16 and 18)

Thanks for the download and the reviews!

These models take time and work to get right, I do this for fun and not business but if you want to support me or show gratitude and buy me a coffee I'd be Extremely grateful! https://www.buymeacoffee.com/eier

Thank you