Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Orange Transmission Distance: 10
PETG JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Scarlet Red
At layer #8 (0.72mm) swap to Orange
At layer #21 (1.76mm) swap to White for the rest.