yeah just ignore it. it slices and prints fine thats how i done the main model

your picture is exactly how you want it in-between the 2 letters

Ok sounds good, thanks

why only 3 stars if it was a great print lol.

nice, how long did it take with colour changes

Letter and heart models are seperated

I made that on a different programme what I downloaded. download this and there is a heart option. just do as you did on the other page and it makes it without the hole https://americanfilament.us/products/lithophane-maker-desktop

Thanks I will look at that. For now I am printing with a plug I made in Bambu Studio to fill the hole.

yeah that would work too just adding a part. the holes are in because they are ment to be hung up to get the light to go through. I make them for people's Christmas trees. and things

hi did you have manual supports on, I had already painted the supports on for the letters what was needed like this photo

yes, I used your profile with the support painting.. still didn't get a good finish in the bottom.. Like I said, it was probably the filament I used (overture PLA).

yeah maybe, I only use cheap filament. I use jayo the cardboard spools. but yeah sometimes the spools go bad. but try again m8 it defo works lol

nothing should need to be changed, the print profile is ready to print. it's had over 1200 downloads between the 2 I put on and yours is the only 1 that says the e comes off. maybe your machine needs a quick calibration or a lvl. the same file everyone uses and even me to do the first print

you can but it will take a really long time a lot of colour changes. only other thing you can do it print the love separate and then glue the heart on, it has a flat bottom on the heart

read the instructions that's on it, you have to put the heart on with your own photo or you would have a photo and me and my mrs lol. it's easy to do just click the link upload your photo and press download and add it to the sliver with the rest of the frame