Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
4.9 h
2 plates
0.2mm layer, 3 walls, 15% infill
Designer
2.3 h
1 plate
3 mm thick 0.2mm layer, 3 walls, 15% infill
Designer
3.1 h
1 plate
Boost
117
213
29
0
345
247
Released
Description
Updated
Now includes left and right hand versions with Santa's sleigh behind him to help balance the weight. It should now stand up on its own.
A 4 Color Santa Door Corner
I left the old version up as well
Comment & Rating (29)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed perfect
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great print! Printed flawlessly
(Edited)The designer has replied
0
Reply
Glad you like it!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Excellent double side, able to use on either side of frame.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
super and easy to print a few for Christmas and friends!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice design but a bit bottom heavy. It wants to tip off the door.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
good file but too side heavy to stay on door corner. I needed to add weights to the top bar to balance the weight of the overhang
0
Reply
Print Profile
3 mm thick 0.2mm layer, 3 walls, 15% infill
PERFECTAMENTE LAMINADO
(Edited)0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Slightly "side" heavy so sometimes difficult to balance on door frame but still love it!
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Great design! I found the “bag” side of the print a little heavy and had to tape the print to the door frame to get it to stay. otherwise it looks great!
0
Reply
the only door corner print I have made that does not set on the door frame by its own weight distribution. I needed to glue on a few magnets as weight to keep it from sliding off.
0
Reply
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld