Titi the Multi face bowl/planter by Svyjvy

Svyjvy

Household>Decor

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.12mm layer, 2 walls, 7% infill

Designer

12.6 h

1 plate

4.8(25)

Boost

156

243

326

207

Released

Description

This is Titi. She can be used as a decorative bowl, or a planter, or whatever you want.

(I recommend printing her upside down so if supports are necessary they don't damage the cosmetics, only the inside of the bowl)

Comment & Rating (31)

@Sideduck

Print Profile

0.12mm layer, 2 walls, 7% infill

As a bowl, I love this thing. Unique, and the only iffy spot was at the bottom of the bowl, where there's a bunch of overhang. Supports did well enough, but it's a little bit loose at the bottom However, this does not make a good planter or cache pot. Without a drainage hole, plants will drown if planted directly into the pot It also cannot be used as a cache pot, because the inside of the bowl is curved to such a degree that a nursery pot won't sit evenly in there. It's also nonstandard dimensions for nursery pots Again, it makes an awesome bowl, and I'm super thankful to the designer for the model, but I'm not going to be able to use it as I intended

(Edited)

The designer has replied

@Svyjvy

Yeah, wasn't the most comfortable with blender (I primarily use cad tools) and so didn't want to overcomplicate by adding a hole since I just wanted a bowl. I think I'll add a version with a drainage hole soon because I want a proper planter version for myself.

(Edited)

@StrawsLaw

Printed it for my brother's girlfriend. No problems printing on the P1S with bronze PLA basic from Bamboo.

(Edited)

@user_1476750180

Print Profile

0.12mm layer, 2 walls, 7% infill

great piece of art thank you

@Olaf_vL

Print Profile

0.12mm layer, 2 walls, 7% infill

insgesamt top, lediglich im Inneren rund um die Stütze etwas holprig

@jtardie

Print Profile

0.12mm layer, 2 walls, 7% infill

I really like this design. I printed it in a Marble-like PLA (Amolen I think) and BL PLA Basic Bronze. They both look cool, but Bronze has a bit of banding. Thanks for sharing your model!