Simple decorative lantern.
Dimensions of lantern: 175x175x345mm (396 to top of eyelet) ( w x d x h )
Pillars need to be tapped M5 thread on both ends.
To assemble 8x M5x20mm Allen screws (Socket head) are needed.
And 4 pillars should be printed. I printed pillars with 3 perimeters to avoid problems with tapping holes.
Top part needs supports underneath.
Pillars fits on the MK3S bed.
For light - LED candle light is recommended ( don't recommend the normal candle, it might cause that top part can melt in high temperature)
Layer high: 0,3 or lower
Material: PET-G, PLA, ABS etc,
Supports are needed on top part.