Shelf Chameleon by 3DPrintable.art

3DPrintable.art

Toys & Games>Other Toys & Games

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

3-Color Print - 0.2mm layer

Designer

8.7 h

1 plate

4.8(20)

70%,One Color,0.2mm layer, 2 walls, 5% infill

2 h

1 plate

4.6(18)

Merged parts, split in 2, 16mm shelf

3.7 h

1 plate

5.0(2)

Boost

485

810

819

366

Released

Description

Please read these instructions before printing!

This cute chameleon is perfect to give some color to your shelves or just as a decorative piece for any room.

The chameleon is available as a raw, single-piece model for those who prefer a one-shot print.

In the provided print profile we've split it in three separate parts that need to be glued together. This allow you to scale the tail to fit perfectly to your shelf. On Bambu Studio select the tail's middle section and adjust the scale as needed:

A minimal amount of support structures is required and should be carefully removed prior to assembly:

COMMERCIAL LICENSE AVAILABLE: https://patreon.com/3DPA

Check out our other models. Your likes and downloads support more content.

Happy printing!

Comment & Rating (45)

@01makes

Print Profile

3-Color Print - 0.2mm layer

Cute model. Printed and glued the 3 parts together. Can you spot the little fella?

@BlkWgn

Print Profile

3-Color Print - 0.2mm layer

looks creat in Creality rainbow silk pla. next time I would probably print it in 1 piece with petg interface but very happy with it as is

@user_3479130014

Boosted

sieht ja schon cool aus

@user_1940452522

Print Profile

3-Color Print - 0.2mm layer

cute print! love that you can size the tail to fit the shelf! printing another for my daughter who loves Tangled!

(Edited)

@seelye

Print Profile

3-Color Print - 0.2mm layer

Supports in the mouth are crucial. The hind legs don’t quite hit the print tray so supports are needed there too, sometimes the back feet will come off when removing the supports. I glued without the spacer to use as a plant pal, I move it around to train the leaves to hang the way I like them too. Fun decoration that blends really well this way but could also be printed with color changing filament.

@themazeprinter

Print Profile

3-Color Print - 0.2mm layer

cute model. however had some rough surfaces where the supports were, if you print in dual color, the tail gradient doesnt match the body in current position (using the profile), and the color changes for the eyes (the black) starts from way down so extra color changes for nothing

@FuXXzNRW

Very nice model, thank you for that. Is it possible to get a version with the eyes removed to print separately? A non multi-color print could save so many hours and the eyes can be easily glued on later. Greetings

@ajones

Print Profile

70%,One Color,0.2mm layer, 2 walls, 5% infill

Idea is great but the part you sized up/down looked different from the tail/body

The designer has replied

@o.0jack

Increase the contact area with the bottom plate to avoid frying the pasta

@hodo52122

Print Profile

3-Color Print - 0.2mm layer

Love!

(Edited)

@user_516776192

Print Profile

70%,One Color,0.2mm layer, 2 walls, 5% infill

supports came were a little weird on the one I printed from the original design. tail was missing bottom layer and the bottom of the main body was scared pretty bad. I’ll mess with the setting and try again. but other then that it’s a nice print

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.