3DMakerpro SEAL or SEAL Lite holder with Lens Cover and cable management by DICMENSION

DICMENSION

Tools>Measure Tools

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 10% infill

Designer

3.9 h

1 plate

4.5(6)

0.2mm layer, 3 walls, 20% infill

3.9 h

1 plate

5.0(2)

Boost

Released

Description

Updated current holder design for the SEAL or SEAL Lite

As requested, I added a cover holder and cable pin slider for the cable.
Please calibrate the filament k factor and flow rate to have better results, it may affect the tolerance between body and cover.

A reminder the slider should be a bit loose to the body.

Comment & Rating (9)

@SithJedi

Print Profile

0.2mm layer, 3 walls, 10% infill

Fits well

@ktsglitterbar

Hard to print, larger bodies need ton of supports. The clip has features that are too small to slice result in printing in 3 pieces. Must use Arachne walls

(Edited)

@MrBaumannn

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Well designed and fit is perfect!

@Jarcenty

Boosted

Print Profile

0.2mm layer, 3 walls, 20% infill

@kelwind0

Print Profile

0.2mm layer, 3 walls, 20% infill

@fesca01

Print Profile

0.2mm layer, 3 walls, 10% infill

@alex10.1997

Print Profile

0.2mm layer, 3 walls, 10% infill

Support Issue:Due to the unfavorable alignment, unfavorable overhangs have been created by the placed support. These scratch the scanner. In addition, the thin wall has not turned out great. I therefore created a new profile and have already tested it.

@nikowynor

Print Profile

0.2mm layer, 3 walls, 10% infill

@eckmannmiles91

Print Profile

0.2mm layer, 3 walls, 10% infill

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.