Jewellery box
Copyright Claim
Jewellery box
Boost
27
29
7
Print Profile(2)
0.2mm layer, 2 walls, 20% infill
Designer
1.9 h
1 plate
lid - 0.2mm layer, 2 walls, 20% infill
Designer
1.2 h
1 plate
Boost
27
29
7
1
65
52
Released
Description
Jewellery box with a lid and 7 trays
Lid has to be printed with supports, because of a small overhangs, but the print comes out really nicely.
You can find updated version with additional insert with 9 trays here https://makerworld.com/sk/models/104689
This one was printed with PLA, 20% infill and supports for the lid.
Defined size of the box is 12 x 12 cm and height is 3 cm. But you can scale it as you please
Comment & Rating (7)
All
Print Profile
0.2mm layer, 2 walls, 20% infill
very good box.
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
0
Reply
Print Profile
lid - 0.2mm layer, 2 walls, 20% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
0
Reply
Print Profile
lid - 0.2mm layer, 2 walls, 20% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld