Lynette Accessories Bundle for Cosplay - Genshin Impact - Instant Download STL Files for 3D Printing

This is a fan-made bundle of cosplay accessories based off Lynette's official art and in game model from Genshin Impact. All of my models are always made from scratch by me. If you would like just a handful of models from this bundle, please contact me so I can put together a mini bundle for you!

You will receive 1 zip folder that contains the 33 stl files:

1. The neck accessories which come separated as the heart buckle and the diamond button. The diamond button is magnet-able and has a single 8x3mm magnet inset in its centre so that you can clip and unclip the shirt with ease.

2. The cloak cat charm.

3. The decorative cloth which comes separated as the end piece, *the cloth piece and 4 identical diamonds. An alternate version of the end piece is included, the model has a 0.25cm slot that goes through the middle so that fabric or thin foam can slide through and be glued within.

4. 2 identical sets of arm accessories which come separated as the shoulder buckle, 4 identical wrist diamonds and the hand diamond. The wrist buttons are magnet-able and each has a single 8x3mm magnet inset in its centre so that you can clip and unclip the buttons together on your sleeve with ease.

5. The back accessory.

6. 6 identical skirt buckles.

7. The boot accessories which come separated as the buckle and cat charm.

8. The Anemo Fontaine (Ousia) vision which comes separated as the frame and core. The frame is pre-separated into 2 halves that are designed to be glued together using their alignment pins as a guide.

More Info for this Product:

*I highly recommend printing with flexible plastics such as TPU, TPE, or flexible resin if you're able so that the model more effectively emulates fabric and allows movement. To colour these models, I recommend gluing flexible fabric (such as spandex) of the appropriate colour on top.

In total, you will need 9 magnets that are 8mm x 3mm for the magnet-able parts (neck diamond button & wrist buttons.) Please also keep in mind that if you change the size of these models at all, the dimensions of its magnet insets will change too.

Some things to consider:

. These models and split parts are designed to fit on a Prusa MK3S printer build volume of 25cm wide, 21cm deep, & 21cm high.

. The included models are scaled to fit a generalised 5'7" tall person. If you would like to resize to a different generalised height (such as 5'3" or 6'0"), and are not comfortable doing it yourself, please contact me so I can do it for you!

. I will be unable to provide the models in any file format other than .stl

. I typically provide the models in a default orientation which is often not at an optimal orientation to print considering various factors, please consider the orientation of the models and adjust them accordingly. If you would like some orientation tips, please contact me.

. Before printing your final parts, make sure to do a test print, double check that the generalised sizes are right for you and re-size if needed. If you decide to resize, make sure to scale all joining parts collectively so that they will fit together. If parts have features that rely on ultra precise measurements such as dowel slots, fabric slots, or magnet insets, please feel free to contact me if you'd like to resize them so that I can do it for you while maintaining the correct size of the feature.

. Models that are pre-split into parts will likely have some degree of seam line depending on how accurately your printer prints the joining edges of the models, the pins, and the voids, as well as material expansion. If you encounter this, I recommend using some sort of filler, such as epoxy putty, to fill in the seam line and then sand everything well for smooth results.

If you have any questions please do not hesitate to contact me!

Feel free to also drop pics of your cosplays, I'd love to see what you make!

Thanks for stopping by! I hope you enjoy!

Designed for FDM and or resin printing

If FDM printing, I recommend trying out the Overture PLA Pro brand of filament. Its more robust and easier to sand than other PLA brands I've tried out, and typically prints very nicely.

General Filament Printer Settings Recommendation:
(Parameters have been tested to work well with Overture PLA Pro)

. A fine layer height of 0.1mm or less for a nice and smooth surface straight off of the print bed. (This helps to minimise time spent on post processing by sanding to obscure layer lines.)

. Organic/tree supports at 45% overhang threshold and 0.2 detachable top z contact distance. (Overall they are much better in my experience than default style supports; With organic/tree supports, surface detail is better retained, they are much easier to remove, minimal marks are left behind after removal, and they tend to use less filament.)

. Infill at around 5-10% gyroid for a more durable model, or 5-10% lightning for a more lightweight model.

. x2-3 walls at 0.8mm thickness for adequately durable model walls. (A model's main strength I find comes from the number of walls and not the infill density. This in conjunction with the infill setting chosen is very dependent on how brittle/impact resistant your filament is.)