Prints best when you don't change any of the uploaded settings.

You can substitue the colors to suit your needs or what you have on hand, but they may not look the same due to TD of the colors. I used Silk Silver instead of Basic Silver in the photos

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Dark Red Transmission Distance: 1.4
PLA BambuLab Matte Scarlet Red Transmission Distance: 0.9
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Matte Ivory White Transmission Distance: 3.3

Swap Instructions:
Start with Dark Red
At layer #21 (1.76mm) swap to Scarlet Red
At layer #23 (1.92mm) swap to Silver
At layer #24 (2mm) swap to Ivory White for the rest.