3D model description
Organizers for The White Castle board game. Quick game set up and comfort during the play. All organizers fit the game box precisely.
The set contains: Clan member organizer, Clan&Token organizer, Player marker organizer, Resources organizer, Bridge&Die organizer and 2 Card trays.
A small game box results in precisely adjusted organizers.
Quick game set up thanks to Clan member organizer that fit the Domain board. It is tall enough to keep wooden markers in place and short enough so all signs under are well visible. There is a container for 4 Clan member organizers, so they are protected while stored. Indentations facilitate taking organizers out. A handle facilitate taking container out of the game box. There is also a section for Yard tiles (with sloped back wall and indentations to facilitate the draw) and a section for Die tiles (with rounded front wall to facilitate the draw).
All other Players' wooden markers are accommodated in a simple Player marker organizer with 4 sections.
There are 2 choices for Resources organizer. You can print (like me) 2 shorter organizers. Thus they can be placed on 2 sides of the table, so all players can reach for tokens easily during the play. Or you can print 1 tall organizer that will accommodate all resources at once. The tall organizer has the same height as 2 shorter organizers placed one on another, so whatever you choose it will occupy the same space in the game box. Of course there is a rounded bottom in each section to facilitate the draw.
Bridges are kept separately in 3 sections of the Bridge&Die organizer. Dice are kept on the bottom and bridges are placed up side down above them. This way components take less space and the container fit the game box perfectly. Indentations facilitate taking bridges out.
There are 2 card trays. They are adjusted to cards without sleeves. There was so little space left in the game box, so these trays are very short (although they are as high as they can be in this situation). Indentations facilitate taking decks out.
Steward and Diplomat level cards are kept in 2 deck tray. Other cards are accommodated in 4 deck tray. As you can see on the photo, some decks share the same slot, so: 2 garden decks are together, 2 starting decks are together and all Solo mode cards are altogether. In the 4 deck tray there is also a central section for +40/+80 VP tokens. Indentations in the organizer facilitate picking it up.
Some photos in higher resolution:
Set + unpacking
Clan members' and token organizers
3D printing settings
All organizers were 3Dprinted on Prusa MK4 (with Input Shaper):
- in PLA (F3D Pearl),
- No support is needed,
- Infill 10% rectilinear,
- 0.2 mm layer height.
I used slightly changed default Print settings "0.20mm SPEED MK4" in PrusaSlicer.
Printing Time (for one organizer of each kind):
20' - Clan member organizer, x4
1h59' - Clan&Token organizer
45' - Player marker organizer
44' - Resources organizer Half, x2
1h1' - Resources organizer All, x1 - as an option
1h21' - Bridge&Die organizer
22' - 2 deck tray
1h - 4 deck tray