This is a dactyl manuform 5x6 that I have fabricated and made. It has 6 3D printed parts in total. For more coding information you can visit my GitHub Repository which has a lot more detail on the coding side of things.
[GitHub](https://github.com/IoakeimSogiakas/dactyl_manuform_5x6-ZMK)

This keyboard was designed to work well with the following parts from Alliexpress.
The holder file is the one where you place the microcontroller, the battery (now that I have made this I would advise going with a bigger one than the one listed) an on-off switch, and a push button for flashing.
The links are the following:
Micro-controller

https://www.aliexpress.com/item/1005006271779544.html?spm=a2g0o.order_list.order_list_main.29.438a1802IiRg7R

Push reset button
https://www.aliexpress.com/item/32873398324.html?spm=a2g0o.productlist.main.27.434f6895q7Q01f&algo_pvid=d91ee638-9009-437b-8b3c-e51087ad202f&algo_exp_id=d91ee638-9009-437b-8b3c-e51087ad202f-13&pdp_npi=4%40dis%21EUR%211.55%211.55%21%21%211.64%211.64%21%402103247017123287688617977ea564%2165602884059%21sea%21GR%21877194638%21&curPageLogUid=9pfbfMah5U7u&utparam-url=scene%3Asearch%7Cquery_from%3A

The battery (mind you, you need two one for each half)
https://www.aliexpress.com/item/1005005796773290.html?spm=a2g0o.order_list.order_list_main.23.438a1802IiRg7R

And the switch (the SS-12F15 version which when you install it you need to cut the screw tabs and glue it in place I used CA glue)
https://www.aliexpress.com/item/1005006035957341.html?spm=a2g0o.order_list.order_list_main.17.438a1802IiRg7R

Lastly, the halves consist of a top part where everything is sited and a bottom cap.
For this you will need mx still switches I went with these (you need 70 of them) which I hand-lubed
https://www.aliexpress.com/item/1005002511539824.html?spm=a2g0o.order_list.order_list_main.59.28a61802QZWmnU

You will need hot-swap sockets these ones
https://www.aliexpress.com/item/1005006105603269.html?spm=a2g0o.productlist.main.7.5c4dBgoiBgoiBs&algo_pvid=5ba5bee9-2adc-4909-adf1-80a93233bf84&algo_exp_id=5ba5bee9-2adc-4909-adf1-80a93233bf84-3&pdp_npi=4%40dis%21EUR%219.38%219.38%21%21%219.92%219.92%21%402101ea8c17123291010791578ea62d%2112000035768903526%21sea%21GR%21877194638%21&curPageLogUid=u1AT6YEUsTjP&utparam-url=scene%3Asearch%7Cquery_from%3A

Some generic 1N4148 diodes like these and some wire to connect everything
https://www.aliexpress.com/item/1005003540554760.html?spm=a2g0o.order_list.order_list_main.54.438a1802IiRg7R

And lastly a keycap set I had a great time with this one
https://www.aliexpress.com/item/1005004537134105.html?spm=a2g0o.order_list.order_list_main.49.438a1802IiRg7R