这是我设计的一个接口,专门用于小米手持吸尘器。它可以完美地连接到小米手持吸尘器上,让您快速地抽出真空袋里的空气。如果您使用的是牺牲层版本,请在ORCA软件中打开“质量”选项下的“搭桥”,然后选择“沉孔搭桥”,最后启用“牺牲层”选项(我建议您使用这个版本进行打印)。
Here's the translation of the paragraph into English:
"This is an interface I created specifically for the Xiaomi handheld vacuum cleaner. It can connect perfectly to the Xiaomi handheld vacuum cleaner, allowing you to quickly remove air from the vacuum bag. If you are using the sacrificial layer version, please open the 'Bridge' option under 'Quality' in the ORCA software, then select 'Sink Bridge', and finally enable the 'Sacrificial Layer' option (I recommend printing with this version)."