Oreo ratchet decompression toy fidget
Copyright Claim
Oreo ratchet decompression toy fidget
Boost
52
109
21
Print Profile(2)
no ams 0.16mm layer, 2 walls, 15% infill no ams
Designer
1.6 h
2 plates
0.16mm layer, 2 walls, 15% infill
2 h
1 plate
Boost
52
109
21
2
154
54
Released
Description
Oreo ratchet decompression toy, no glue or screws needed, fully 3D printed parts, after assembly it can make a "click click click" sound, very decompressing, using PETG to print the ratchet.
Optimized the assembly part, the latch needs to be forcefully assembled.
If the size difference is too large, it can be trimmed with scissors before assembly. Thank you for your support, please follow us, and there will be more fun gadgets to come.
如果尺寸差距过大，可以用剪刀修剪后再装配。感谢大家的支持，请关注我们，后续还有更多有趣的小玩具。
Comment & Rating (21)
All
Print Profile
no ams 0.16mm layer, 2 walls, 15% infill no ams
This was a cool print since my youngest lost Oreo's I thought he'd love to mess with as a fidget. I print it in PETG and sadly had to reprint one cookie side with supports a second time because it kind of printed like poo...second time worked though. Also took a little effort to get it to snap together.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
It almost looks like a real Oreo! Center gear is too large. I couldn't force it into place. I trimmed it down and trimmed out the insert for the gear. After all that, YES, it does work and the ratchet sound is awesome!
0
Reply
你确定自己实验过吗，中间的销钉根本不可能放进去
The designer has replied
1
Reply
感谢打印，我的是可以放进去的，稍微用点力，晚点我优化下模型，谢谢
0
Reply
Replying to @EEGG
用打火机融化一下用工具抚平后胶水粘住了
0
Reply
Middle piece is too big, you can trim and force in but then it won't spin. Other outside piece fits poorly. One of the white pieces is oriented upside down which then needs supports to print. Nice design, but poor fitment.
The designer has replied
0
Reply
Thank you for your suggestion. I will update the design when I have time, please stay tuned.
0
Reply
Boosted
棒
0
Reply
Boosted
棒
0
Reply
Print Profile
no ams 0.16mm layer, 2 walls, 15% infill no ams
hard to put together
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
sweet print
(Edited)0
Reply
to fit mega hard to put to getter
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
printed well. assembly was a little tough, but that means it wont come apart easily.
a little big for reality or a keychain.
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld