Hey friends, here's my latest model.
You can change the size of the X and Y axes,
but DO NOT change the Z axis.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Start with Black
At layer #11 (0.96mm) swap to Gray
At layer #18 (1.52mm) swap to Jade White
At layer #22 (1.84mm) swap to Red
At layer #26 (2.16mm) swap to Jade White for the rest.

Store: https://thinkto3d.etsy.com

Donate: https://paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8

Commercial license: https://patreon.com/Think_3D/membership