以前吃小虎队干脆面的时候,一直在集天龙八部的卡,都是满满的回忆啊。
依靠3D打印机,再次重温一下那些经典画作,赋予角色不同的展现。
使用Hueforge生成
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Green
At layer #16 (1.36mm) swap to Red
At layer #21 (1.76mm) swap to Yellow
At layer #27 (2.24mm) swap to Jade White for the rest.