This is a fan-made bundle of cosplay accessories based off Neuvillette's official art and in game model from Genshin Impact. All of my models are always made from scratch by me. If you would like just a handful of models from this bundle, please contact me so I can put together a mini bundle for you!
Due to etsy's upload limits, you will receive a google drive link with 1 zip folder that contains the 123 stl files:
The hair pins which come separated as the large feather pin and the small pin.
The neck accessories which come separated as the brooch core, the brooch gem, the brooch diamond, the brooch droplet gem, 2 identical droplet buttons and 2 identical collar buttons. The collar and droplet buttons each have a single 8x3mm magnet inset in its centre so that you can clip and unclip the buttons from the collar with ease.
The coat collar accessories which come separated as the right collar core, the left collar core, the left collar slot in pin, 2 identical hanging piece cores and 4 identical hanging piece gems. Each collar core is separated into 2 parts that are designed to be glued together using their alignment pins as a guide.
The front undercoat accessories which come separated as 3 identical diamond buttons and the front clip. The diamond buttons each have a single 8x3mm magnet inset in its centre so that you can clip and unclip the buttons from the shirt with ease. The front clip is halved into 2 parts that are Not meant to be glued together but rather are designed to have 6 8mm x 3mm magnets glued within insets on either side of the part walls so that you can clip and unclip the two pieces together with ease, each parts alignment pins will keep it aligned correctly and support the magnets.
2 identical sets of arm accessories which come separated as the cloak accessory, the cloak circular bead, the cloak droplet bead, the wrist pin core, 2 identical wrist pin slot in gems and 4 identical hand diamonds. Each wrist pin core is separated into 2 parts that are designed to be glued together using their alignment pins as a guide. The whole wrist pin core model is also included.
The back coat accessories which come separated as the centre piece top, the centre piece bottom, the centre piece slot in gem, 2 identical eye pieces and 2 identical side fabric trims.
The hair clip which comes separated as the core and the gem.
The back undercoat accessories which come separated as the 2 identical eye piece 1, 2 identical eye piece 2, 2 identical eye piece 3, the centre top piece and 2 identical centre lower pieces.
2 identical sets of leg accessories which come separated as the belt accessory, the belt end, 6 identical circular buttons, 6 identical buckle hold, the boot cover, 4 identical boot buckles, 2 identical studs, the decorative heel core, the decorative heel gem, and the front boot accessory. The circular buttons each have a single 8x3mm magnet inset in its centre so that you can clip and unclip the buttons from the leggings with ease. I highly recommend gluing the heel part onto the back of an actual heel as the model is not built to be walked on alone.
More Info for this Product:
In total, you will need 13 magnets that are 8mm x 3mm for the magnet-able parts (neck buttons & front undercoat accessories.) Please also keep in mind that if you change the size of these models at all, the dimensions of its magnet insets will change too.
Some things to consider:
. These models and split parts are designed to fit on a Prusa MK3S printer build volume of 25cm wide, 21cm deep, & 21cm high.
. The included models are scaled to fit a generalised 5'7" tall person. If you would like to resize to a different generalised height (such as 5'3" or 6'0"), and are not comfortable doing it yourself, please contact me so I can do it for you!
. I will be unable to provide the models in any file format other than .stl
. I typically provide the models in a default orientation which is often not at an optimal orientation to print considering various factors, please consider the orientation of the models and adjust them accordingly. If you would like some orientation tips, please contact me.
. Before printing your final parts, make sure to do a test print, double check that the generalised sizes are right for you and re-size if needed. If you decide to resize, make sure to scale all joining parts collectively so that they will fit together. If parts have features that rely on ultra precise measurements such as dowel slots, fabric slots, or magnet insets, please feel free to contact me if you'd like to resize them so that I can do it for you while maintaining the correct size of the feature.
. Models that are pre-split into parts will likely have some degree of seam line depending on how accurately your printer prints the joining edges of the models, the pins, and the voids, as well as material expansion. If you encounter this, I recommend using some sort of filler, such as epoxy putty, to fill in the seam line and then sand everything well for smooth results.
If you have any questions please do not hesitate to contact me!
Feel free to also drop pics of your cosplays, I'd love to see what you make!
Thanks for stopping by! I hope you enjoy!