Print Profile(1)
150x150 - 0.08mm layer, 2 walls, 15% infill
Designer
1.7 h
1 plate
Boost
16
19
2
3
12
16
Released
Description
If you have AMS, the filament swap will change at the correct layer.
If you need to swap filaments manually add a pause at the described layer below.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal
PLA BambuLab Glow Green
Swap Instructions:
Start with Black
At layer #6 (0.88mm) swap to BambuLab Green for the rest.
Comment & Rating (2)
All
Print Profile
150x150 - 0.08mm layer, 2 walls, 15% infill
0
Reply
Boosted
good print
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld