3D model description
Unfortunately, the Snapermaker Artisan does not come with an extraction device for the dust generated when using the CNC module. One option is therefore to make one yourself, for which there are now some freely available models. Unfortunately, these quickly become clogged when milling with larger bits as the extraction shafts are too narrow and they are also difficult to clean as the shafts are difficult to access. I have therefore adapted a freely available extraction variant accordingly.
The suction device is adapted for the cheaply available Dyson V7 extension hoses. If you would like to use a different hose, a model is included that does not have the connection. You are welcome to adapt this model to your requirements.
The enclosed wall connection is compatible on the outside with any standard hoover with a nozzle diameter between 31 and 35 mm. On the inside, it can be connected to the suction carriage with a Dyson V7 hoover hose (example in the notes below).
Printing and general information:
- The individual components are held in place by 10 10x5 mm magnets. An adapter ring is included with which you can also use magnets with a diameter of 6 mm. However, make sure that the magnets are strong enough.
- I recommend TPU for printing the brushes. Two brush models are included, both of which should be printed and inserted. You will need glue to attach them.
- You can find a suitable tube here: https://www.amazon.de/dp/B0BVR9Q1M2/
German Description/Deutsche Beschreibung
Leider kommt der Snapermaker Artisan ohne eine Absaugvorrichtung für den entstehenden Staub bei Verwendung des CNC Moduls. Eine Möglichkeit ist es daher, sich selbst eine herzustellen, wofür es inzwischen einige frei verfügbare Modelle gibt. Leider verstopfen diese schnell einmal beim Fräsen mit größeren Bits, da die Absaugschächte zu schmal dimensioniert sind und sie lassen sich dann auch schwierig reinigen, da die Schächte nur schwer zugänglich sind. Ich habe daher ein frei verfügbare Absaugvariante entsprechend angepasst.
Die Absaugvorrichtung ist für den günstig erhältlich Dyson V7 Verlängerungsschläuche angepasst. Für den Fall, dass ihr einen anderen Schlauch verwenden möchtet, liegt ein Modell bei, bei dem der Anschluss fehlt. Ihr könnt dieses Modell gerne euren Wünschen entsprechend anpassen.
Der beiliegende Wandanschluss ist auf der Außenseite kompatibel zu jedem standard Staubsauger mit einem Düsendurchmesser zwischen 31 und 35 mm. Auf der Innenseite kann dieser mit einem Dyson V7 Staubsaugerschlauch mit dem Absaugschlitten verbunden werden (Beispiel in den Hinweisen weiter unten).
Druck- und allgemeine Hinweise:
- Die einzelnen Komponenten werden mittels 10 Stück 10x5 mm Magnete an ihrer Position gehalten. Es liegt ein Adapterring bei mit dem ihr auch Magnete mit 6 mm Durchmesser verwenden könnt. Achtet aber darauf, dass die Magnete stark genug sind.
- Für das Drucken der Bürsten empfehle ich TPU. Es liegen zwei Bürsten-Modelle bei, die beide gedruckt und eingesetzt werden sollen. Zur Befestigung benötigt ihr Kleber.
- Einen passenden Schlauch findet ihr bspw. hier: https://www.amazon.de/dp/B0BVR9Q1M2/
Copyright:
This model is based on model "Snapmaker Artisan CNC Dust cover" by zhgzs released under CC BY found here https://www.thingiverse.com/thing:5954060