1:24 Texaco Gas Station Replica

I offer for STL files for sale for the 1950s Texaco Gas Station. The model will go really good in any diorama. Could be in a garage or office. The model is built in multiple pieces.

IMPORTANT! READ BEFORE BUYING!
´When you buy this model you will receive a STL files. When you put the STL files in the printer. You MUST downscale the model from 100% to 80%. This will make sure you can fit the model on the build plate. For tolerances to fit you must also print at 80%. If you scale it down to 40% the pieces will no longer fit

When you print. Please print at a low speed for the first 15 layers. The printspeed should be at 50-60%. This will prevent the pieces from warping. You don´t want the pieces to warp. Because then you cant fit the walls.

You will need to buy a polycarbonate/plexiglass plate at a thickness of 1 mm. This is for the windows in the garageport and office. For the floor in the bathrooms and the office. You will need to duplicate the black square for the fitting amount. The model does NOT include a roof. But a wooden plate will do the job.

THE ONLY THING THAT NEEDS GLUE IS the 3-lines under the stars. This model is decomposable. So you can take it apart if you wanna remove it.

For the doors. You will need to cut a little metal shaft. It will make sense when you print the model.

IMPORTANT! YOU MIGHT FIND THAT THE PARTS DONT RIGHT OUT OF THE PRINTER. BUT WITH SMALL TRIMMING. THEN THEY WILL ;)

It is possible to put in LED lights. I have made openings for the cable. I glued LED lights to the wooden roof

Good luck with the printing