ARLECCHINO SCYTHE - CRIMSON MOON'S SEMBLANCE - GENSHIN IMPACT

I made the braid, and now I will write out a large instruction, since there is a lot to say, and even a lot!

The braid is the size from the left edge to the right, it came out to be 168 cm, this is based on the average size in the game and the height of the character, under a 25mm PVC pipe and 8mm rods (I decided to run the rod along the entire braid, there are also 2 cutting options, with a rod in the center and without, in case you just print with good filling and with good glue and are sure that it will not break!), but if your height is less than 164 cm or you want a smaller braid, you can reduce the size of the model in the slicer by 20-21 percent, thereby reducing the size of the braid to 135 cm and will fit a 20mm pipe and a 6mm rod! I'll say right away that it's better to take a shovel handle or any other wooden stick with suitable dimensions, but the problem is if you're printing with a rod, you'll need to drill it, or pour construction foam into the PVC pipe for strength! And the part that goes into the pipe bears the bulk of the weight, so it's better to print it with more filling! The files contain models without cutting, in case you want to cut them yourself or give them to people who understand this better. There are 2 versions of the scythe, C1 and C5, they differ only in the patterns on the blade and the red elements, I only cut the C1 scythe, since for many it will be more convenient to process and in most cases it will be visible to players, few people will run with a C5 scythe on start :D

I still post references so that you don't get lost in the details and you have references for painting.

P.S In the last picture, the green lines are how the model is cut.