Have you ever gotten tired of your old, plain business card holders? Introducing the one and only card holder you will ever need, The Scissor Lift!! You can customize and add your own labels either through a Cricut (what I used) or even 3D print a text and slap it on there. This color scheme is based on a Genie, but can be modified to any color or you choosing.
INSTRUCTIONS:
They are pretty straight forward, just 3D print the files. If individual parts are needed they are available in the parts folder. Once printed, assemble with glue.
PRINT SETTINGS:
Infill Type: Any (I used Grid)
Infill Density: For the base, do between 30%-50% and every thing else 30% or below
Layer Height: 0.2mm
Supports: None
Brim: none
All together this probably look a good 6-8 hours for everything. If there are any problems, leave a comment and I will try to address.