Seattle Mariners hueforge. Print profile is for NON-AMS, has manual breaks at the layers.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA HueForge Navy Blue 1.3 Transmission Distance: 8
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA PolyTerra Arctic Teal Transmission Distance: 0.5
PLA Overture Matte White Transmission Distance: 3.7

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Navy Blue 1.3
At layer #13 (1.12mm) swap to Scarlet Red
At layer #15 (1.28mm) swap to Arctic Teal
At layer #19 (1.6mm) swap to White for the rest.
 

If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation or join my patreon for early access and request priority prints.

https://www.patreon.com/sblayeredcreations