Who’s up for a massive challenge? Well here’s one for you - I designed 51 different maze levels, each more complex than the previous one. This design is for the maze level 11. While the maze design is level 15, the cup that has the hooks is designed to fit levels 11 to level 15, so if you choose to do more than one level, you don’t need to print the cup 5 times (unless you want to).

Print specifications (ON P1P printer):

LEVEL 15 MAZE:

 
Layer height: 0.2 mm

Infill type: Gyroid

Infill percentage: 12%
Print speed: 250 mm/s

The case for the maze

 
Layer height: 0.2 mm

Infill type: Gyroid

Infill percentage: 12%
Print speed: 250 mm/s

The print total is around 4 - 5 hours (depending on printer and settings). And it takes about 40 meters (125 grams) of material
 
I am regularly designing more and more levels to keep the excitement for those who are interested!

Other levels can be found here:
Level 1

Level 2

Level 3
Level 4

Level 5

Level 6

Level 7

Level 8

Level 9

Level 10

Level 11

Level 12

Level 13

Level 14

Level 16

Level 17

Level 18

Level 19

Level 20

Level 21

Level 22

Level 23

Level 24

Level 25

If you are interested in more levels, consider boosting any of these levels as that enables me to make more designs in a shorter span of time.  Thank you for your support