Warning tolerances are tight

I made this because my son wanted a rocket toy to play

Fire drops on takeoff and hides on landing

most parts are screwed together

for the hinge use a pice of filament (Nylon for best results but pla or petg will work fine)

some suports are needed at wings and door, i recommend use them on the body too, especially if your printer is lacking on the part cooling fan department like mine

some parts need glue, like wings and glass

print glass and door on their side, use skirt and check if require a little suport on the few first layers

How to assembly:

0- Print model, chose 3 or 4 wing model. Recommendation: use color change on mini propulsor to mach rocket color scheme

1- Insert flame inside Propulsor

2-insert base (3 or 4 wing) around Propulsor

3-Screw Propulsor on base of body

4-Glue Wings to base and Mini propulsor to wings

5-insert antenna on tip

6- screw tip on top of body

7- screw antenna tip on top of antenna

8- glue glass to body from inside and glass to door from inside too, then glue latter to inside of door

9-Attach door to body using a pice of filament inside the hinge

if you enjoy any of my work, or it made your life simpler in any way, please consider showing some love as a few cents on the tips, if don't want or can't that's just fine, have a blessed day